Roland DWP-80S User Manual page 47

C
Click , and then click the location where you want to add a support.
The spot you clicked appears as shown in the drawing below.
D
Click [Update supports].
A new support has been added.
If it is not possible to attach the support, it appears as shown in the drawing below.
E
Click [Check supports].
You can check the state of all the supports.
Delete Supports
Procedure
A
Click .
B
Click [Select point to delete].
The object will turn transparent.
C
Click , and then click on the supports you want to delete.
Use Advanced/Useful Functions
Chapter 2 Output
47