Roland DWP-80S User Manual page 18

1. Preparing the Machine
D
Fully tighten the liquid material vat retaining screws.
When doing so, verify that the liquid material vat stopper is resting on the edge of the liquid material
vat.
M E M O
In the next procedure, the liquid material vat retaining screws are only loosened by a fixed amount. For this
reason, the liquid material vat retaining screws are tightened securely at this stage.
E
Loosen the liquid material vat retaining screws one turn.
18
Chapter 2 Output
Liquid material
vat stopper