Roland DWP-80S User Manual page 32

3. Printing
E
Put the printing platform in the work tray.
F
Remove the job using the included metallic spatula.
Take extra care not to damage or break the job when removing it.
Metallic
spatula
* Do not leave resin in the liquid material vat after printing. Be sure to clean the liquid material
vat, printing platform, and work tray.
" P. 36 "Maintenance after Use"(P. 36 "1. Wash the printing platform.", P. 39 "2. Wash the liquid material vat.", "P.
40 "3. Clean the work tray.")
32
Chapter 2 Output
Printing
platform
Job
Work tray