Roland DWP-80S User Manual page 38

3. Printing
G
Soak a rag or other cloth in ethanol and wipe away any remaining resin.
Be sure to remove all the resin that has adhered to the printing platform. Allowing the resin to remain
can cause the printing platform to deteriorate and printing to fail.
H
Attach the printing platform plate.
H e x a g o n a l
wrench
I
Return the printing platform to its original position.
J
Tighten the printing platform retaining screw.
Tightening the retaining screw will raise the printing platform. Tighten the screw until the printing
platform cannot be easily moved by hand.
38
Chapter 2 Output