Table of Contents
Advertisement
2.
Determine the layout and generate supports.
M E M O
Supports are reinforcing members added to data that support the job. Supports can prevent the job from falling
into the liquid material vat or deforming due to the effects of gravity. Quick Denta can automatically add supports
to objects.
A
Click
.
B
Position (lay out) the objects.
Refer to P. 26 "Recommended Layout" for the recommended layout.
Clicking the object displays handles around the object for movement. When an object is clicked and
dragged (by moving the computer mouse), the object's position will be moved.
Clicking the object again displays rotation handles around the object. Clicking on a rotation handle
causes the handle to turn red. Clicking and dragging an object in this state will rotate the object with
the handle as the anchor.
2. Create the Print File in Quick Denta
Importa nt
Do not allow the object to
become tilted. If the object is
positioned at an angle in any
direction, the object may fall
over and cause printing to fail.
Chapter 2 Output
25
Advertisement
Table of Contents
