Placing The Radio In Do-Not-Disturb Mode - Tait tm8200 Operator's Manual

Placing the radio in do-not-disturb mode

If you do not want calls for a while, you can place the radio in
do-not-disturb mode, so that incoming calls can be ignored.
You can make outgoing calls in the usual way.
Note: While do-not-disturb mode is active, incoming calls
To place the radio in do-not-disturb mode, you may be able
to either:
Activating do-not-disturb mode by using a
function key
1
2
Activating do-not-disturb mode by using the
Main menu
1
2
3
cannot be stored in the call queue.
use a programmed function key, or
use the Main menu.
Press the function key programmed for do not disturb, to
activate the do-not-disturb function.
The message Do not disturb activated appears in the
display. Your radio will now ignore all incoming calls.
To deactivate the do-not-disturb function, press the do-not-
disturb function key again.
The message Do not disturb deactivated appears in the
display.
Select Menu>Radio Settings>
Call Settings>Do not disturb.
In the Do Not Disturb menu, choose
On.
Press Select.
The message Do not disturb activated
appears in the display. Your radio will
now ignore all incoming calls.
Operating in MPT trunked mode 47