Turning On Control-Head Backlighting - Tait tm8200 Operator's Manual

2
3

Turning on control-head backlighting

The radio's display and keypad light up when backlighting is
on. This normally only happens when a key is pressed or a call
is received. There are two ways you may be able to change
the way backlighting operates on your radio:
Turning backlighting on momentarily by using
a function key
You may be able to use a programmed function key to turn
backlighting on momentarily. Backlighting remains on for a
few seconds and then turns off.
Alternatively, the function key may be programmed so that:
Toggling backlighting on and off by using a
function key
The function key programmed for backlighting toggles the
backlighting between on and off. When backlighting is
turned on, it remains on until the function key is pressed
again.
Turning backlighting on and off by using the
Main menu
When backlighting is turned on using the menu, it remains on
until the setting is changed to off, regardless of radio activity.
In the Silent Operation menu,
choose On.
Press Select.
turn on backlighting momentarily, using a programmed
function key, or
toggle backlighting between on and off, using either a pro-
grammed function key or the Main menu.
a short key press turns backlighting on momentarily, and
a long key press turns backlighting on, and it remains on
until there is a further long key press.
Customizing radio settings 59