Selecting A Channel - Tait tm8200 Operator's Manual

2
3
Selecting a zone by using your Quick
Access menu
Note: Your scroll keys may be programmed for zone scroll. If
1
2
3
4

Selecting a channel

To select a channel you may be able to either:
16 Operating in conventional mode
In the Zones menu, scroll through the
list of zones until the one you
want appears.
Press Select.
The zone indication may be
programmed to appear either below the
channel information or beside the
RSSI symbol.
this is the case, press the scroll key to immediately begin
scrolling through your list of zones.
Press one of the scroll keys
Zones menu.
Alternatively, the left selection key may
be programmed as your Quick Access
menu. In this case, press the left selec-
tion key to access the Zones menu.
Scroll through the list of zones until the
zone you want appears.
Press Select.
The zone indication may be
programmed to appear either below the
channel information or beside the
RSSI symbol.
use a programmed function key,
use the Main menu, or
use your quick access menu.
or to open the