Features Of Simatic Pdm Rev. 6.0, Sp4 Or Higher; Features Of Simatic Pdm Rev. 5.2, Sp1; Simatic Pdm Version; Electronic Device Description (Edd) - Siemens SITRANS LR250 Operating Instructions Manual

Remote operation
7.1 Operating via SIMATIC PDM
7.1.1.1

Features of SIMATIC PDM Rev. 6.0, SP4 or higher

The graphic interface in the device makes monitoring and adjustments easy.
Feature
Quick Start (Page 78)
Echo Profile Utilities (Page 84)
Auto False Echo Suppression
(Page 87)
TVT Shaper (Page 86)
Process Variables (Page 97)
Security (Page 103)
7.1.1.2

Features of SIMATIC PDM Rev. 5.2, SP1

SIMATIC PDM Rev. 5.2 SP1 is supported only for basic configuration and troubleshooting. For
advanced features such as the Quick Start wizard, Rev. 6.0 SP3 HF2 or higher is required.
7.1.1.3

SIMATIC PDM Version

Check the support page of our website to make sure you have the latest version of SIMATIC
PDM, the most recent Service Pack (SP) and the most recent hot fix (HF): SIMATIC PDM
Version (https://support.automation.siemens.com). Browse to Product Information > Automation
Technology > Process control systems > SIMATIC PCS 7 > System components > SIMATIC
PDM.
7.1.2

Electronic Device Description (EDD)

7.1.2.1

Updating the Electronic Device Description (EDD)

You can locate the EDD in Device Catalog, under
Sensors/Level/Echo/SiemensMilltronics/SITRANS LR250. The EDD revision must match the
Firmware revision in the device.
76
Function
Device configuration for simple applications
Easy access to echo profile viewing/comparison, TVT shaping,
auto false echo suppression and echo setup
Screen out false echoes
Manual TVT adjustment
Monitor process variables and level trend
Protect security and communication parameters from
modification by the maintenance user
Operating Instructions, 08/2014, A5E32221386-AC
SITRANS LR250 (PROFIBUS PA)