Siemens SITRANS LR250 Operating Instructions Manual page 110

Parameter reference
Language (1.1.)
Material (1.2.)
Response Rate (1.3.)
Units (1.4.)
Operating Mode (1.5.)
Low Calibration Point (1.6.)
High Calibration Point (1.7.)
Apply? (Apply changes) (1.8.)
Setup (2.)
Note
• Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
stated.
• Values shown in the following tables can be entered via the handheld programmer.
108
SITRANS LR250 (PROFIBUS PA)
Operating Instructions, 08/2014, A5E32221386-AC