Acknowledge Faults; Wear; Simulation - Siemens SITRANS LR250 Operating Instructions Manual

Remote operation
7.1 Operating via SIMATIC PDM
7.1.5.5

Acknowledge Faults

Open the menu Device – Acknowledge Faults, select the appropriate item from the Extended
Diagnostics pull-down menu, and click on Transfer.
7.1.5.6

Wear

Reports the number of hours the device has been operating, and the number of times it has
been powered up.
Open the menu Device – Wear to view:
● Powered Hours
● Power-on Resets
7.1.5.7

Simulation

Note
The Simulation parameter influences output to the control system.
Two options enable you to test the functioning of the Analog Input Function Blocks or the
functioning of everything between the Transducer Block and Output. For more details see
Analog Input Function Blocks 1 and 2 (Page 261).
Simulate analog input to AIFB1 or AIFB2
Allows you to input a simulated measured value, status, and quality, in order to test the
functioning of an Analog Input Function Block.
92
SITRANS LR250 (PROFIBUS PA)
Operating Instructions, 08/2014, A5E32221386-AC