GW Instek AFG-3022 User Manual page 267

SOURce[1|2]:APPLy:TRIangle
Description
Syntax
Parameter
Example
SOURce[1|2]:APPLy:DC
Description
Note
Syntax
Parameter
Example
268
nd Quality Products Online at:
AFG-3021/3022/3031/3032 User Manual
Outputs a triangle wave from the selected channel
when the command has executed. Frequency,
amplitude and offset can also be set.
SOURce[1|2]:APPLy:TRIangle [<frequency>
[,<amplitude> [,<offset>] ]]
<frequency>
amplitude
< >
<offset>
SOUR1:APPL:TRI 2khz,3.0,1.0
Sets the frequency to 1 MHz with an amplitude of
3 volts and with an offset of 1 volt.
Outputs a DC signal from the selected channel
when the command has executed. Amplitude and
offset can also be set.
Frequency cannot be used with the DC function;
however a value (or DEFault) must be specified.
SOURce[1|2]::APPLy:DC
[<frequency>|DEFault[,<amplitude> [,<offset>]]]
<frequency|DEFault>
<amplitude>
<offset>
SOUR1:APPL:DC DEF,3.0,1.0
Sets the DC voltage to 4 volts (amplitude of 3V
with an offset of 1 volt).
GlobalTestSupply
www.
Source Specific
Command
1μHz~1MHz
1mV~10V (50Ω)
0~4.99V (50Ω)
Source Specific
Command
1μHz~1MHz
1mV~10V (50Ω)
0~4.99V (50Ω)
.com
sales@GlobalTestSupply.co