Figure 4.24Nb Pcie Configuration - Advantech ARK-5420 Series User Manual

4.2.3.4 NB PCIe Configuration

PEGO - Gen X
This item is used to set PCIe Gen function level and default setting is "Auto".
The user can setting "Gen1", "Gen2" or "Gen3".

PEGO ASPM
This item is used to set PEGO ASPM function and default setting is "Auto". The
user can setting "Disabled", "ASPM L0s", "ASPM L1", "ASPM L0sL1".

Enable PEG
This item is used to set PEG function and default setting is "Auto".

Detect Non-Compliance Device
This item is used to set system to detect Non-compliance device and default
setting is "Enabled".

De-emphasis Control
This item is used to set different De-emphasis values and default setting is
"-3.5dB".

PEG sampler Calibrate
This item is used to set PEG sampler Calibrate and default setting is "Auto".

Swing Control
This item is used to set Swing control and default setting is "Full". The user also
can set "Reduced" or "Half" mode.

Gen3 Equalization
This item is used to set Gen3 Equalization function and default is "Enabled".
ARK-5420 User Manual
Figure 4.24 NB PCIe Configuration
40