–
LCD Control
4.2.3.3
DMI Configuration
DMI Vc1 Control
This item is used to set DMI Vc1 control and Default setting is "Enabled".
DMI Vcp Control
This item is used to set DMI Vcp control and Default setting is "Enabled".
DMI Vcm Control
This item is used to set DMI Vcm control and Default setting is "Enabled".
DMI Extended Synch Control
This item is used to set DMI Extended Synch control and default setting is "Dis-
abled".
DMI Gen2
This item is used to set DMI Gen2. This item can be setting at "Auto", "Enabled"
and "Disabled". The default setting is "Auto".
Figure 4.22 LCD Control
Figure 4.23 DMI Configuration
39
ARK-5420 User Manual