Cisco IE 3000 Hardware Installation Manual page 64

Installing the Switch
Push the DIN rail latches in after the switch is over the DIN rail. See
Step 4
Figure 2-21
Note
Cisco IE 3000 Switch Hardware Installation Guide
2-30
Pushing the DIN Rail Latches In
If you are using a 15-mm DIN rail, rotate all of the feet (see
positions. Otherwise, rotate all of the feet to the recessed positions.
DIN rails. You can use either the 7.5-mm or the 15-mm DIN rail.
Chapter 2 Switch Installation
Figure 2-21.
Figure 2-21) to the extended
Figure 2-22 shows the two