Cisco IE 3000 Hardware Installation Manual page 45

Chapter 2 Switch Installation
Push up the upper module latches (at the top of the switch and the expansion module). See
Step 3
Push down the lower module latches (at the bottom of the switch and the expansion module).
Figure 2-4
Align the connectors on the switch and the module, and slide the switch and the module together to make
Step 4
the connection. See
Figure 2-5
Push the upper module latches down and the lower latches up. See
Step 5
Pushing the Module Latches Up
Figure 2-5.
Connecting the Switch and the Module
Adding Modules to the Switch
Figure 2-6.
Cisco IE 3000 Switch Hardware Installation Guide
Figure 2-4.
2-11