Table of Contents
Advertisement
Chapter 5: Access Point Mode
Operating in Access Point mode, the Pocket VoIP Gateway provides 802.11b/g
connectivity for wireless clients, with robust security options available and QoS
support for voice or video traffic.
In Access Point mode, the WAN and LAN ports act like two normal Ethernet switch
ports. There are no firewall or NAT features for traffic passing between the WAN and
LAN ports or wireless clients. There is also no DHCP server to assign IP addresses
to connected clients. A configured DHCP server must exist on the connected local
network to provide IP addresses to clients.
To access the web management interface in Access Point mode, connect directly to
the unit and used the default IP address, 192.168.7.1. Alternatively, if you want to
set an IP address that is compatible with the local network, use Gateway mode to
configure a fixed IP address first, then change back to Access Point mode.
Access Point mode configuration parameters are described in the relevant chapter
of this guide. See the page references below to locate feature information.
Table 5-1. Access Point Configuration Options
Menu
Status
System
Wireless
Setting
Security
Wireless QoS
Figure 5-1. Access Point Mode Settings
Description
Displays current system information
Configures basic administrative and client access
Configures wireless connectivity
Configures the ESSID and other radio parameters
Configures wireless encryption and authentication
Controls QoS for traffic prioritization
Page
9-1
6-1
7-1
7-1
7-4
7-7
5-1
Advertisement
Table of Contents
