Table of Contents
Advertisement
3
NAT
DMZ
If you have a client PC that cannot run an Internet application properly from behind
the NAT firewall, you can open the client up to unrestricted two-way internet access
by defining a virtual-DMZ (virtual-demilitarized-zone) host.
Figure 3-8. Gateway Mode DMZ
• Enable – Enables the feature.
• IP Address of Virtual DMZ Host – Specifies the IP address of the virtual DMZ
host. (Default: 0.0.0.0)
Note: Adding a host to the DMZ may expose your local network to a variety of security
risks, so only use this option as a last resort.
3-9
Advertisement
Table of Contents
