Table of Contents
Advertisement
4
Wireless Client Mode
Menu
VoIP
SIP Settings
Advanced Setting
Mode Configuration
When operating in Wireless Client mode, you must set a Service Set Identification
(SSID) to identify the wireless network service to which you want to connect. First
perform a site survey to find nearby available access points, then select the wireless
network service you want to use from the displayed list. If the wireless network uses
WEP security, enter a valid key provided by the service operator.
Mode Selection – Allows you to select Auto configuration (2 operating modes) or
Manual configuration (3 operating modes). (Default: Auto)
• Auto – The unit automatically selects the operating mode depending on the WAN
port status.
- With no link on the WAN port, the unit starts up in Wireless Client mode.
- With a link on the WAN port, the unit starts up in Gateway mode.
• Manual – Allows you to manually select the mode in which the unit operates:
- Gateway – The unit operates as a secure Internet gateway between a WAN port
connection and a wired LAN or wireless devices.
4-2
Table 4-1. Wireless Client Configuration Options
Description
Configures VoIP parameters
Configures SIP parameters
Configures call forwarding, and DTMF parameters
Figure 4-2. Wireless Client Mode Configuration
Page
8-1
8-2
8-3
Advertisement
Table of Contents
