Table of Contents
Advertisement
Chapter 4: Wireless Client Mode
Operating in Wireless Client mode, the Pocket VoIP Gateway can connect to an
802.11b/g wireless network, forwarding traffic from an attached PC.
To access a wireless network in Wireless Client mode, connect your PC to the LAN
port and then set your PC's network connection to DHCP. In Wireless Client mode,
the Pocket VoIP Gateway acts as a DHCP server to assign IP address settings to
one client connected on the LAN port. Use the default IP address, 192.168.7.1, to
access the web management interface. Using the Setup Wizard or from the Mode
Config page, you can then set up a connection to a nearby access point. See
"Connecting to an Access Point" on page 4-3.
The information in this chapter is organized to reflect the structure of the web
interface pages for easy reference. All VoIP configuration information is located in
Chapter 5.
The Advanced Configuration pages include the following options.
Table 4-1. Wireless Client Configuration Options
Menu
System
Mode Config
User Settings
System Tools
System Status
System Log
Figure 4-1. Wireless Client Settings
Description
Configures basic administrative and client access
Sets up a client connection with a wireless network
Configures user password for management access
Allows you to restore the factory default settings, or store
your own setting
Displays current system information
Displays system log events
Page
6-1
4-2
4-5
4-6
4-7
4-9
4-1
Advertisement
Table of Contents
