Table of Contents
Advertisement
2
Using the Setup Wizard
ISP Gateway Address – The gateway IP address of your ISP.
Figure 2-9. Gateway WAN Type - Dial-Up xDSL
For a dial-up xDSL (PPPoE) connection you are prompted for the following
information:
User Name – Enter your user name for connecting to the xDSL service, as
supplied by your ISP. (Range: 1-32 characters)
Password – Specify the password for your xDSL connection, as supplied by
your ISP. (Default: No password)
Service Name – Enter the xDSL service name (if any) as supplied by your ISP.
MTU (1400~1492) – The Maximum Transmission Unit for Ethernet data
transmission. Only change the default value if specifically instructed by your
ISP. (Range: 1400~1492 bytes)
Maximum Idle Time (1~99) – The maximum length of inactive time the unit will
stay connected to the xDSL service provider before disconnecting. This feature
only works when Auto-Reconnect is selected. (Range: 1~99 minutes)
Auto-reconnect – Selecting this option prompts the unit to reconnect to the
xDSL service provider after the connection has been lost.
2-4
Advertisement
Table of Contents
