Connecting the Pocket VoIP Gateway
3.
Power on the Pocket VoIP Gateway by connecting the AC power adapter and
plugging it into a power source.
4.
Use your PC's web browser to access the Pocket VoIP Gateway's
management interface and run the Setup Wizard to make any configuration
changes (refer to the Management Guide for details). The Pocket VoIP
Gateway has a default IP address of 192.168.7.1 and a subnet mask of
255.255.255.0.
Note:
If your PC has an IP address assigned by DHCP (Dynamic Host Configuration
Protocol) or is set on the same subnet as the Pocket VoIP Gateway (that is, the
PC's IP address starts 192.168.7.x), you can connect immediately to the web
management interface. Otherwise, you must first change your PC's IP address to
be on the same subnet as the Pocket VoIP Gateway.
Wireless Client
Used as a wireless client, the Pocket VoIP Gateway can connect your PC to any
nearby access point.
Pocket
VoIP Gateway
(Default IP 192.168.7.1)
To connect the Pocket VoIP Gateway for use as a wireless client, follow these steps:
2-2
Access Point
1
Connect
LAN port
to PC
Internet
2
Connect
AC power
adapter to
power source
Notebook PC