Osburn SATURNA Installation And Operating Instructions Manual page 4

APPLIANCE DIMENSIONS
Figure 1
INSTALLATION CODES
Installation must conform to local codes. In the absence of local codes, installation must conform to
the National Fuel Gas Code, ANSI Z233.1 1988, (in the U.S.), or with the current installation code
CAN/CGA B149.1 – M86 (in Canada). The heater, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local codes, with the National Electric Code
ANSI/NFPA No. 70-1990 (in the U.S.) or with the current CSA C22.1 Canadian Electrical Code (in
Canada). In the state of Massachusetts, this product can only be installed by a licensed plumber or a
licensed gas fitter. Failure to comply will void the warranty. In mobile homes the installation must
meet the Manufactured Home Construction and Safety Standard Title 24 CFR, Part 3280, or the
current Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities
ANSI/NFPA 501A, and with CAN/CSA Z240 MH Mobile Home Standard in Canada.
4