Location And Function Of Parts - Sony PXW-FS7M2 Operating Instructions Manual

000 4
1. Overview

Location and Function of Parts

Left Side, Front Side, and Handle
1
2
3
4
5
6
7
1.
Handle (page 5)
2.
Viewfinder connector (page 15)
3.
REMOTE connector (page 18)
4.
INPUT1 (LINE/MIC/MIC+48V) switch
(page 35)
5.
Shoulder pad (page 19)
6.
INPUT2 (LINE/MIC/MIC+48V) switch
(page 35)
7.
Grip attachment (page 18)
15 16 17 18
8
9
10
11
12
13
14
8.
USB wireless LAN module connector
(page 41)
9.
Recording indicator (page 72)
Flashes when the remaining capacity on the
recording media or battery is low.
10.
Lens lock ring stopper (page 17)
11.
Tape measure hook
The tape measure hook is on the same plane
as the image sensor. To measure the distance
between the camcorder and the subject
accurately, use this hook as a reference point. You
can attach the end of a tape measure to the hook
to measure the distance from the subject.
12.
WB SET (white balance set) button
(page 34)
13.
Lens lock pin (page 17)
14.
Lens lock ring (page 17)
15.
Accessory shoe (page 4)
16.
Handle record START/STOP button
The record button cannot be operated when the
lock lever is in the lock position.
17.
Handle zoom lever (page 54)
18.
Multi-interface shoe
For details about accessories supported by
the multi-interface shoe, contact your sales
representative.
Attaching the accessory shoe
1
Lift the front edge of the shoe spring, and pull
the spring in the opposite direction to the
arrow engraved on the spring.
Shoe spring
1
Accessory shoe
2
Position the accessory shoe on the accessory
shoe mount, aligning the protrusions on the
shoe with the corresponding points on the
mount, and tighten the four screws.
3
Insert the shoe spring in the direction of the
arrow so that the U-shaped portion fits onto
the end of the accessory shoe.
Accessory shoe
3
2 2
Shoe spring