Table of Contents
Advertisement
000
54
5. Menu Display and Settings: Setup Menu List
Camera >Flicker Reduce
Sets flicker correction settings.
Item
Sub-item setting
Off
Mode
Auto / On /
Frequency
50Hz /
60Hz
Camera >SteadyShot
Sets image stabilization settings.
Item
Sub-item setting
Setting
Active SteadyShot /
SteadyShot
Camera >Handle Zoom
Sets handle zoom settings.
Item
Sub-item setting
Zoom Speed
Fix /
Variable
/ Off
Type
Zoom Speed
1 to 8 (3)
Camera >Auto Black Balance
Sets auto black balance settings.
Item
Sub-item setting
Auto Black
Execute / Cancel
Balance
Description
Sets the flicker correction mode.
Sets the frequency of the power source
supplying the lighting that is causing the
flicker.
Description
/ Off
Turns the image stabilization function on/off.
[Note]
Enabled when a compatible lens is attached.
Description
Sets the mode of the zoom lever on the
handle.
[Note]
Disabled when the handle is not attached.
Sets the speed of the handle zoom.
(Enabled when Zoom Speed Type is set to
Fix)
[Note]
Disabled when the handle is not attached.
Description
Runs the auto black balance function.
[Notes]
ˎ Run the auto black balance function with the
ˎ
lens cap attached.
ˎ Cannot be run during recording or color bar
ˎ
display.
ˎ Cannot be run when in Interval Rec mode or
ˎ
Slow & Quick Motion mode.
Camera >AF Micro Adjustment
Sets focus position micro adjustment. (Enabled when LA-EA2/4 (option) is used)
Item
Sub-item setting
Off
Setting
On /
Amount
–20 to
0
to +20
Clear All
Execute / Cancel
Camera >Video Light Set
Sets the video light lighting method. Available only when using the HVL-LBPC (option).
Item
Sub-item setting
Video Light
Power Link
/ Rec Link / Rec Link + Stby
Set
Description
Turns the auto focus micro adjustment
function on/off.
Sets the auto focus micro adjustment level.
Use the following procedure to adjust
A-mount lenses.
1
Attach the lens you want to adjust using
an LA-EA2/4 (option).
2
Set Setting to On, and adjust the
Amount value.
Positive values move the focus behind
the subject, and negative values move
the focus in front of the subject.
It is recommended that you check the
result using one-push AF, for example,
while adjusting the focus.
Initializes the saved adjustment values.
Description
Sets the lighting control method for the
video light attached to the multi-interface
shoe.
Power Link:
Turns the video light on/off when the
camcorder is turned on/off.
Rec Link:
Turns the video light on/off when the
camcorder starts/stops recording.
Rec Link + Stby:
Turns the video light on/off when the
camcorder is recording or in standby
mode.
Hide quick links:
Advertisement
Table of Contents
