Table of Contents
Advertisement
000 44
4. Thumbnail Screen
Thumbnail Screen
The thumbnail screen appears if you press the THUMBNAIL button (page 6). The thumbnail screen displays the clips stored on XQD memory cards as thumbnails (index pictures).
You can select a clip on the thumbnail screen and start playback of that clip. The playback image can be displayed in the viewfinder and on an external monitor.
Pressing the THUMBNAIL button again closes the thumbnail screen and returns to the camera image.
[Notes]
ˎ Only the clips recorded in the currently selected recording format are displayed on the thumbnail screen. If an expected recorded clip is not displayed, check the recording format. Take special note of this fact before formatting (initializing) media.
ˎ
ˎ When Codec >Select in the System menu is set to one of the following, recording cannot be started during playback or when the thumbnail screen is displayed.
ˎ
RAW & XAVC-I, RAW & XAVC-L, RAW & MPEG HD422
Screen Layout
Information for the clip at the cursor position is displayed at the bottom of the screen.
1.
Thumbnail (index picture)
Displays the index picture of a clip. When a clip is
recorded, its first frame is automatically set as the
index picture.
Clip/frame information is displayed below the
thumbnail. You change the information displayed
using Customize View (page 67) >Thumbnail
Caption in the Thumbnail menu.
2.
Clip name
Displays the name of the selected clip.
3.
Recording video format
Currently selected XQD memory card indicator
(A lock icon is displayed if the card is protected.)
Cursor (yellow)
1
2
3
Displays the file format of the selected clip.
4.
Special recording information
Displays the recording mode only if the clip was
recorded using a special recording mode.
For Slow & Quick Motion clips, the frame rate is
displayed on the right.
5.
Clip duration
6.
Creation date
Clip number/Total number of clips
6
4
5
Hide quick links:
Advertisement
Table of Contents
