000
88
7. Appendix: Error/Warning Messages
Display message
Media Error
Cannot Use Media (A)
1)
Media (A)
1)
Error
Recording Halted
Playback Halted
Media Reached Rewriting Limit
Change Media (A)
1)
Fan Stopped
Invalid setting value was reset:
Media/Clip Naming/Camera Position
Please save All File again
1) "(B)" is displayed for the card in slot B.
Cause and Solution
The memory card may be damaged, and can no longer be used for
recording or playback.
The card cannot be used in the camcorder, and must be replaced.
Recording and playback was stopped because an error occurred
while using the memory card.
If the problem persists, replace the memory card.
The memory card has reached the end of its life.
Make a backup, and replace the card immediately. If you continue
using the card, the card may not be able to record or play.
For details, refer to the operating instructions for the memory card.
The built-in fan stopped.
Avoid use at high temperatures, disconnect the power, and contact
your Sony service representative.
The Clip Naming format setting was reset because an invalid ALL
file was loaded.
Configure the desired format settings, and try to save the ALL file
again.