Displaying The Wi-Fi Remote Control - Sony PXW-FS7M2 Operating Instructions Manual

000 43
3. Shooting

Displaying the Wi-Fi Remote Control

The Wi-Fi Remote screen is automatically resized
to match the screen size of the connected device.
1
Connect the camcorder and device using a
Wireless LAN connection (page 41).
2
Launch a browser on the device and enter
"http://IP address of camcorder (Wi-Fi >IP
Address in System menu)/rm.html" in the URL
bar.
For example, if the IP address is 192.168.1.1,
enter "http://192.168.1.1/rm.html" in the URL
bar.
3
Enter the user name and password (Basic
Authentication >User Name and Password in
the System menu).
When connection is successful, the Wi-Fi
Remote screen appears on the device.
You use the Wi-Fi Remote screen to operate
the camcorder.
You can disable the record button operation
by sliding the Lock knob to the right.
[Notes]
ˎ To display the page for a smartphone, change "rm.
ˎ
html" to "rms.html" in the URL. To display the page for a
tablet, change "rm.html" to "rmt.html" in the URL. When
"rm.html" is entered, the page automatically switches
for display on the corresponding device. However, the
appropriate page may not be displayed, depending on
the device.
ˎ The Wi-Fi Remote screen may not match the camcorder
ˎ
settings under the following circumstances. If this occurs,
reload the browser window.
– If the camcorder is restarted while connected
– If the camcorder is operated directly while connected
– If the device has been reconnected
– If the browser Forward/Back buttons have been used
ˎ The Wi-Fi remote control may not function if the wireless ˎ
signal strength becomes weak.