AEMC 6240 User Manual page 28

9. In the Ready to Install the Program window, click on Install.
10. If the feature selected for installation requires the use of a USB port, a
warning box will appear, similar to Figure 5-3. Click OK.
If USB drivers are not needed, setup will continue at Step 13.
11. The Install Driver dialog box will appear. Click on Install.
NOTE: The installation of the drivers may take a few moments. Windows
may even indicate that it is not responding, however it is running. Please
wait for it to finish.
12. When the drivers are finished installing, the Installation Successful
dialog box will appear. Click on OK.
13. Next, the Installation Wizard Complete window will appear. Click on
Finish.
14. A Question dialog box appears next. Click Yes to read the procedure
for connecting the instrument to the USB port on the computer.
NOTE: The Set-up window remains open. You may now select another
option to download (e.g. Adobe
15. Restart your computer, then connect the instrument to the USB port
on the computer.
26
Figure 5-3
Figure 5-4
Reader), or close the window.
®
Micro-Ohmmeter Model 6240