Display Symbols - AEMC 6240 User Manual

2.6

Display Symbols

The display incorporates two lines of characters to display test results, as
well as a library of symbols to assist the operator in determining conditions
at a glance. The symbols that can appear are shown in Figure 2-2.
Indicates the measurement is noisy; accuracy is not guaranteed
Indicates the battery charge condition; the segments represent energy
Indicates that power down is deactivated
Not used
Displayed measurement about to be stored in memory
MEM
Memory recall
MR
Indicates the memory is being erased
CLR
Indicates internal overheating
Indicates the direction of current
+ I
Indicates the direction of current
- I
Indicates that a measurement has been stopped
First position locator for data stored in memory
OBJ.
Second position locator for data stored in memory
TEST
Not used
°C / °F
Memory utilization indicator
Displays average
AVG
Not used
Indicates an overrange
>
10
_
+I
°
I
HOLD
OBJ.
>
AVG
<
2nd
Figure 2-2
R (+I) + R (-I)
P COM MEMMRCLR
°C°F
mV
mA
TEST
2
V
DC
AC
µmΩ
Micro-Ohmmeter Model 6240