Painting The Speakers; Care And Maintenance; Specifications - REVELL M55XC Owner's Manual

PAINTING THE SPEAKERS

The ABS speaker enclosures of the M55XC and M80XC can be painted
to match almost any decor.
Remove the grille. Mask the entire baffle, all wire terminals, and product
labels. Please be careful that no tape comes in direct contact with the
tweeter or woofer.
Clean the enclosures with a light solvent such as mineral spirits by
rubbing the components with a lightly dampened cloth. Do not, however,
use abrasives such as sandpaper or steel wool on the enclosures. Nor
should you use gasoline, kerosene, acetone, MEK, paint thinner, harsh
detergents or, other chemicals. Use of these cleaners may result in
permanent damage to the enclosures.
After cleaning, apply two or more thin coats of either latex or oil-based
paints. Latex paints will adhere better if an oil-based primer is used first.
Application can be by rolling, brushing, or spraying.
The grilles require masking of the logo, and then spray painting. If the
grille is rolled or brush painted, the mesh may become clogged with
paint, and poor sound quality may result.
The InvisiBall mount may also be painted, but because it is metal, latex
™
paints will not adhere as well as other finishes.

SPECIFICATIONS

FEATURE
Description
Enclosure Type
High Frequency Drive Components
Low Frequency Drive Components
Recommended Amplifier Power
Impedance
Transformer Taps
Sensitivity
Frequency Range
Low Frequency Extension
Crossover Frequency
Input Connections
Mounting
Dimensions H x W x D
Weight
Finishes
Included Accessories
Features, specifications and appearance are subject to change without notice.
6

CARE AND MAINTENANCE

Revel XC Series Outdoor Monitors have been designed and
manufactured for durability and reliable service. As with any fine
product, proper maintenance and care will extend the life of the system.
You can expect your system components to perform indefinitely if you
use them within their stated limits for power handling, and see that they
are not abused.
Always protect the loudspeakers from over-excursion caused by strong
subsonic signals (signals below 30Hz). If your amplifier has a "low cut"
or "high pass" switch, engage it.
Revel XC outdoor loudspeakers are durable enough to withstand direct
exposure to the elements and therefore may become dirty after some
time outdoors. They can be rinsed clean with a low-pressure water
stream from a garden hose or spray bottle and then dried with a soft
cloth. Do not use a pressure washer or any high-pressure water streams
directly on the front of the loudspeaker as the drivers could become
damaged rendering the product inoperable.
M55XC
2-way Extreme Climate Outdoor Loudspeaker
Sealed
1-inch / 25mm Aluminum dome tweeter
5.25-inch / 130mm Carbon-infused
Polypropylene cone woofer
10-60W
70V / 100V 60W variable tap with 8-ohm bypass
70V: 60W, 30W, 15W, 7.5W, 8-ohm bypass
100V: 60W, 30W, 15W, 8-ohm bypass
88dB @ 2.83V / 1m
-3dB from 90Hz - 22kHz
-10dB @ 60Hz, -6dB @ 74Hz, -3dB @ 90Hz
2.4kHz
Stainless Steel screw terminals
InvisiBall mounting system
®
9.3 x 7.4 x 5.8 in (236 x 188 x 149 mm)
8.0 in (200mm) deep when mounted on
InvisiBall wall mount
8.2 lb (3.7 kg)
Black or White
Input terminal weather cover, InvisiBall
wall mount, 6 x 100mm hex key
M80XC
2-way Extreme Climate Outdoor Loudspeaker
Sealed
1-inch / 25mm Aluminum dome tweeter
8-inch / 200mm Aluminum cone woofer
20-80W
70V / 100V 60W variable tap with 8-ohm bypass
70V: 60W, 30W, 15W, 7.5W, 8-ohm bypass
100V: 60W, 30W, 15W, 8-ohm bypass
89dB @ 2.83V / 1m
-3dB from 60Hz - 22kHz
-10dB @ 45Hz, -6dB @ 52Hz, -3dB @ 60Hz
2.3kHz
Stainless Steel screw terminals
InvisiBall mounting system
®
15 x 11 x 8.6 in (380 x 280 x 220 mm)
8.0 in (200mm) deep when mounted on
InvisiBall wall mount
14 lb (6.4 kg)
Black or White
Input terminal weather cover, InvisiBall
wall mount, 6 x 180mm hex key
XC Series Outdoor Monitors
Owner's Manual