Table of Contents
Advertisement
CABINET CARE
Each EMBRACE speaker cabinet has a paint finish and does not
require any routine maintenance. Use a soft cloth, dampened with
water only, to remove any fingerprints or to wipe off dust. Clean
the grille by gentle vacuuming.
SPEAKERS AND POWER
An EMBRACE speaker uses high-order crossovers with steep cut-
offs to eliminate damage caused by "out of band" frequencies.
Using this approach, in combination with carefully selected com-
ponents and transducers, gives us confidence that a EMBRACE
speaker will not fail, even under extreme conditions. However,
there is a limit to how loud any speaker can play continuously. A
good rule of thumb is to avoid playing the system at volume levels
beyond where the sound is "clear." If the sound becomes distorted
or strained, reduce the volume level immediately to avoid damage.
If you are unsure of the suitability of current or planned amplifier
components, please ask your Revel dealer to review them before
connecting your EMBRACE surround speakers.
SPECIFICATIONS
Frequency Response:
Sensitivity:
Impedance:
Driver Complement:
Crossover:
Weight:
Dimensions:
Revel constantly strives to update and improve existing products, as well as create new ones. Therefore the specifi-
cations and construction details in this and related Revel publications are subject to change without notice. Dual
Drive is a trademark of Harman International Industries, Inc.
EMBRACE
22
Owner's Manual
80 Hz ~ 20 kHz @ + 1.5 dB (averaged in room)
86 dB SPL, with 2.83 V rms @ 1 m
4 ohms (nominal), 3.2 ohms (minimum)
(1) 8" woofer, (2) 4" midranges, (2) 1" tweeters
3-way, @ 250 Hz and 2.75 kHz; provision for
bipole, dipole, or Dual Drive™ connections
96 lb (43.5 kg) shipping weight for pair
11
3
⁄
"H x 23
3
⁄
"W x 9
5
⁄
" D
8
4
8
289 mm H x 603 mm W x 245 mm D
(overall dimensions include grilles; also refer to
Figure 21 on the next page)
Hide quick links:
Advertisement
Table of Contents
