Parameter Table; Understanding The Parameter Table - YASKAWA L1000E Quick Start Manual

B

Parameter Table

◆ Understanding the Parameter Table

Control Modes, Symbols, and Terms
■
The table below lists terms and symbols used in this section to indicate which parameters are available in which control
modes.
Symbol
Parameter is available in all control modes.
All Modes
Parameter is available when operating the drive with V/f Control.
V/f
Parameter is available when operating the drive with Open Loop Vector.
OLV
Parameter is available when operating the drive with Closed Loop Vector.
CLV
Parameter is available when operating the drive with Closed Loop Vector for PM motors.
CLV/PM
Parameter can be changed during run.
Motor 2
Refers to a second motor when the drive is operating two motors. Switch between these motors using the multi-function input terminals.
Note: If a parameter is not available in a certain control mode, the symbol for that control mode is grayed out.
◆ Parameter Table
■ A: Initialization Parameters
The A parameter group creates the operating environment for the drive. This includes the parameter Access Level, Motor
Control Method, Password, User Parameters and more.
A1: Initialization Parameters
No.(Addr.) Name
A1-00
(100H)
Language Selection
<1>
A1-01
(101H)
Access Level Selection
YASKAWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide
Table 54 Symbols and Icons Used in the Parameter Table
All Modes
0: English
1: Japanese
2: German
3: French
4: Italian
5: Spanish
6: Portuguese
7: Chinese
8: Czech
9: Russian
10: Turkish
11: Polish
12: Greek
All Modes
0: View and set A1-01 and A1-04. U -
1: User Parameters (access to a set of parameters selected by the user, A2-01 to
A2-32)
2: Advanced Access (access to view and set all parameters)
Description
Description
parameters can also be viewed.
B Parameter Table
Setting
common
_
Default: 0
Min: 0
Max: 12
<2>
common
_
Default: 2
Min: 0
Max: 2
163
B