Editing Relay Output Channel Settings (In Pictures) - Honeywell Touchpoint Plus Technical Handbook

MAN0984_Iss 2_06/15
7) Set input channels and events to link the Relay Output channel and touch 'Finish'.
8) Check that all edited settings are correct and select 'Apply'.
9) Confirm that all edited settings are correct and select 'Update'.
10) Repeat 4 to 9 for all required mA Output channels.

7.6.7 Editing Relay Output Channel Settings (In Pictures)

Commissioning
Key:
A1:
A2:
A3:
FLT:
INHIB:
WARN:
58
Technical Handbook
Alarm 1
Alarm 2
Alarm 3
Fault
Inhibit
Warning
Touchpoint Plus