MAN0984_Iss 2_06/15
8.9 How to Change the SD Card
Note: The system can accept standard SD cards from 2 to 32 GB (FAT32), and will provide a notification
when the card has less than 50 Mb of free space.
Caution: Do not leave the SD card out for too long or some event data may be lost.
To change the SD Card:
1) Select Menu>Maintenance>SD Card>Eject.
2) When prompted, remove the SD Card and insert a 2 to 32 GB (FAT32) standard card. Note the correct
orientation in the picture below.
3) Confirm that the screen shows the SD Card as being correctly inserted and that it has sufficient free
space (i.e. >50 Mb).
Maintenance
Figure 33. SD Card Location
71
Touchpoint Plus
Technical Handbook