Kenwood DPX-U5130 Service Manual page 14

3.2.3 Removing the Pickup assy (See Fig.6)
(1) Remove the 1 screw C.
(2) Remove the Main shaft in the direction of the arrow.
(3) Remove the Spring.
(4) Remove the Pickup assy.
C
Main shaft
3.2.4 Removing the Roller lever assy (See Fig.7)
(1) Remove the Spring.
(2) Remove the Roller lever assy in the direction of the arrow.
Roller lever assy
Pickup assy
Spring
Fig.6
Spring
Fig.7
(No.WA063<Rev.003>)14/31
3.2.5 Removing the Clamp arm assy (See Fig.8)
(1) Remove the Spring.
(2) Remove the Clamp arm assy in the direction of the arrow.
Clamp arm assy
3.2.6 Removing the Feed motor (See Fig.9, 10)
(1) Remove the 4 screws D attaching the Feed motor assy.
(See Fig.9)
(2) Remove the 2 screws E attaching the Feed motor.
(See Fig.10)
(3) Remove the Feed motor. (See Fig.10)
E
Spring
Fig.8
D
Fig.9
Feed motor
Fig.10