9150
User's Guide
1.3 Authorized Service Centers
Please contact one of the following authorized Service Centers to coordinate
service on your Hart product:
1-4
Find Quality Products Online at:
•
Never introduce foreign material into the probe hole of the
insert. Fluids, etc. can leak into the calibrator causing
damage.
•
DO NOT change the values of the calibration constants
from the factory set values. The correct setting of these
parameters is important to the safety and proper operation
of the calibrator.
•
DO NOT drop or force the probe stems into the well. This
type of action can cause a shock to the sensor and affect
the calibration.
•
DO use a ground fault interrupt device.
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com