Fluke 9150 User Manual page 57

Find Quality Products Online at:
•
The calibration instrument has been designed with the utmost care. Ease
of operation and simplicity of maintenance have been a central theme in
the product development. Therefore, with proper care the instrument
should require very little maintenance. Avoid operating the instrument in
an oily, wet, dirty, or dusty environment.
•
If the outside of the instrument becomes soiled, it may be wiped clean
with a damp cloth and mild detergent. Do not use harsh chemicals on the
surface which may damage the paint.
•
Be sure that the well of the furnace is kept clean and clear of any foreign
matter. DO NOT use fluids to clean out the well.
•
If a hazardous material is split on or inside the equipment, the user is
responsible for taking the appropriate decontamination steps as outlined
by the national safety council with respect to the material.
•
If the mains supply cord becomes damaged, replace it with a cord of the
appropriate gauge wire for the current of the instrument. If there are any
questions, call Hart Scientific Customer Service for more information.
•
Before using any cleaning or decontamination method except those
recommended by Hart, users should check with Hart Scientific Customer
Service to be sure that the proposed method will not damage the
equipment.
•
If the instrument is used in a manner not in accordance with the
equipment design, the operation of the furnace may be impaired or safety
hazards may arise.
•
The over-temperature cutout should be checked every 6 months to see
that it is working properly.
GlobalTestSupply
www.
Chapter 12
Maintenance
.com
sales@GlobalTestSupply.com
12-1