Service Factory Mode; Details Of The Factory Menu - Pioneer KRP-500P Service Manual

1

6. SERVICE FACTORY MODE

6.1 DETAILS OF THE FACTORY MENU

A
The Factory menu will be displayed only when the Media Receiver is connected. For details on how to enter Factory menu,
refer to "6.1 DETAILS OF THE FACTORY MENU" in the service manual for the Media Receiver.
[1] PANEL FACT.
Operation Items
This is the menu screen for the adjustment of the panel. Data acquisition and value adjustment can be performed for
the following items:
B
No. Indication
[1-1] PANEL INFORMATION
[1-2] PANEL WORKS
[1-3] POWER DOWN
[1-4] SHUT DOWN
[1-5] PANEL-1 ADJ (+)
C
[1-6] PANEL-2 ADJ (+)
[1-7] PANEL FUNCTION (+)
[1-8] ETC. (+)
[1-9] RASTER MASK SETUP (+)
[1-10] PATTERN MASK SETUP (+)
[1-11] COMBI MASK SETUP (+)
D
E
F
92
1
2
Description of functions
Data, such as the version of the microcomputer of the panel, product serial number, and
statuses of EEPROM for adjustment values for the main unit and for backup, are
displayed.
Operation data, such as accumulated pulse-meter count, accumulated hour-meter
count, accumulated power-on count, and the temperature detected by the sensor, are
displayed.
The power-down history is displayed.
The shutdown history of the panel section is displayed.
Settings of the driving voltage and AM radio prevention can be performed.
White balance and ABL (power consumption) for the panel can be set.
Setting of the panel-degradation correction-level and various functions are displayed.
Copying of backup data, clearing of various settings, and changing of settings for
functions for which setting data are not stored upon last update are performed.
The mask indication (RASTER) can be set and indicated.
The mask indication (PATTERN) can be set and indicated.
The mask indication (COMBI) can be set and indicated.
KRP-500P
2
3
3
4
4