1
5.7 OUTLINE OF RS-232C COMMAND
A
[1] PREPARED TOOLS
It is necessary to prepare the following one to use 232C command.
• PC
• Application for control
• 232C cable (straight)
∗ The setting of the Com port cannot be communicated if it doesn't do correctly.
(Please follow a set explanation of PC in the Com port)
B
[2] USING RS-232C COMMANDS
Issue the SYSS00 command to set the unit to Standalone Operation mode.
C
D
E
F
70
1
2
KRP-500P
2
3
3
4
4