1
6. SERVICE FACTORY MODE
6.1 OUTLINE OF THE SERVICE FACTORY MODE
Operations during Service Factory mode are described here.
A
6.1.1 SERVICE FACTORY MODE TRANSITION CHART
B
• The function is changed.
• The signal mode is changed.
C
D
6.1.2 HOW TO ENTER/EXIT SERVICE FACTORY MODE
How to enter Service Factory Mode
By using a PDP service remote control)
• PDP service remote control
By issuing RS-232C commands )
• During normal Standby mode
• During normal operation mode
How to exit Service Factory Mode
By using a PDP service remote control)
• PDP service remote control
E
• Supplied remote control unit
By issuing RS-232C commands)
• Issue [FAN].
F
80
1
2
Standby mode
POWER
[POF]
(MTB INFORMATION)
: Press [FACTORY] key.
: Issue [PON] then [FAY].
: Issue [FAY].
: press [FACTORY] key.
: press [HOME MENU] key.
2
3
INFORMATION
PANEL FACTORY
OPTION
INITIALIZE
How to enter Service Factory Mode by Using the
supplied Remote Control Unit
• Same as previous model. Please refer to the technical document
(Service Know-how).
PDP-5010FD
3
4
Power supply ON mode
FACT
FACT
[FAY]
HOME MENU
[FAN]
Effective IR in Factory mode
RS-232C Factory mode
[ (MUTING)]
Effective 232C
command in Factory mode
4