Pioneer KRP-500P Service Manual page 104

1
A
[2] PANEL MAIN FACT.
Operation Items in the PANEL MAIN FACT. Menu
On the PANEL MAIN FACT. menu screen, acquisition of information on and settings for the display main unit can be
performed, as shown in the table below:
No. Indication
[2-1] VERSION (3)
[2-2] PM NG INFO.
B
[2-3] PM STATE INFO.
[2-4] DP_RX INFO.
[2-5] PM_SETUP (+)
[2-6] PM_BEZEL_SETUP
[2-7] PM_NG_CLEAR
C
Description of Indications on Each Layer
[2-1] VERSION (3)
The versions of the microcomputers for the display (incl. those for the display main unit) are indicated on the VERSION (3)
screen. No other layers are nested below this layer, and there are no adjustment items.
Although the description on the VERSION (3) screen is included in the PANEL MAIN FACT. section, this screen actually
belongs to the INFORMATION layer.
1 5
1
I N F O R M A T I O N
V E R S I O N (
D
5 P M A I N
M O D U L E
S E Q P R S
D P R X
D P R X
10
P A N E L
15
16
E
Contents of the Display item
• P MAIN: Version of the writing data for the Panel Main microcomputer
• MODULE: Version of the writing data for the Module microcomputer
• SEQ PRS: Version of the writing data for the sequence LSI
• DP RX: Version of the writing data for the DP receiver firmware
• DP RX HARD: Version of the hardware for the DP receiver
• PANEL INFO: Information on the display panel
F
104
1
2
To indicate the versions of the microcomputers for the display (incl. those for the display
main unit)
To indicate the shutdown history of the display main unit
To indicate temperatures of the display main unit, state of the fans, brightness, and
model information
Data on the DP receiver
To clear the history and perform function settings whose data are not retained after the
unit is turned off
To perform the bezel setup
To clear the shutdown history
10 15 20 25
I N 1 – 3 0 1 0 1 – N T V
3 )
– 0 2 A S
– 0 2 A
– 0 1 U
1 . 1 0
H A R D 0 C 1 5
I N F O X X X X X X X X
2
3
Description of functions
30 32
– J H B
0 1 A
0 2 A
0 1 U
KRP-500P
3
4
4