Service Factory Mode - Pioneer PDP-436SXE Service Manual

5

6.3 SERVICE FACTORY MODE

To operate in Service Factory mode, use the supplied remote control unit.
How to enter Service Factory Mode
While in Standby mode, follow the below procedure with the remote control to enter Service Factory mode.
1. Press the [ DISPLAY ] key.
2. 3 second counter will start.
3. After 3 second, press [ LEFT ] key.
(If no operation is done within 10 seconds, the Service Factory
routine is cleared, and the standby mode is returned.)
4. 5 second counter will start. The Service Factory is up and ready.
* During step 3 to 8, if other opeartion is done, the Service Factory routine is cleared.
* If the counting time is over up, the normal standby mode is returned.
Operation in Service Factory Mode
¶ Functions whose settings are set to OFF
The settings for the following functions are set to OFF when Service Factory mode is entered (including when the "FAY"
command is received):
• FREEZE
• Mask Control
• ORBITER (Operating at center value)
¶ User data
User data will be treated as follows:
• User data on picture- and audio-quality adjustments are not reflected, and factory-preset data are output (user data will be
retained in memory). When the unit enters Factory mode, the current audio-quality adjustment data will still be retained in
memory.
• As to data on various settings, user data will be applied to the items that are associated with signal format change (screen
size switching, etc.).
• Data on screen (i.e., screen position, and not including data on screen size) are reset to the default
values (data stored in memory will be retained). Screen size will be retained.
Remote control codes in Service Factory mode
SR Function Main Function
Muting Switching the main items
DOWN Switching the subtitled items
UP Switching the subtitled items
Increasing the adjustment
LEFT
value
Decreasing the adjustment
RIGHT
value
SET Switching layers
INPUT Selecting input
INPUTxx Selecting input
Increasing the channel
CH+
number
Decreasing the channel
CH-
number
Numeric
Function: TV
keys
POWER Power OFF
FACTORY Factory OFF
MENU Menu ON
5
6
Remarks
Shifting to the next main item (top)
Shifting downward to the next subtitled item
Shifting upward to the next upper layer
Increasing the adjustment value
Decreasing the adjustment value
Shifting downward or upward to the next lower or
upper layer
Shifting the input to the next function
Switching the input to xx
Advancing a preset channel
(effective when Function is set to TV)
Turning a preset channel backward
(effective when Function is set to TV)
Function: TV
(previously selected channel number is selected)
Turning the power off
Turning Service Factory mode off
Turning Service Factory mode off and Menu mode on
PDP-436SXE
6
7
5. Before 5 second counter ends, press [ UP ] key.
6. Before 5 second counter ends, press [ LEFT ] key.
7. Before 5 second counter ends, press [ RIGHT ] key.
8. Before 5 second counter ends, press [ POWER ] key.
9. If the procedure is correct within the counting time,
the Service Factory Mode starts.
TV/DTV
EPG
EXIT
PDP-436SXE
(AXD1515)
7
8
A
B
C
D
E
F
PDP-436RXE
(AXD1516)
63
8