Junction Box - Furuno FCR-2829W Installation Manual

4.1.4 Setting the heading readout on the radar display
Confirm that the gyrocompass is giving a reliable readout. Then, set the heading read-
out on the radar display with the gyrocompass readout.
1. Open the main menu.
2. Press the 7 key to select the [OWN SHIP INFO] menu.
3. Press the 3 key to select the [LOCAL SENSOR SETTING].
4. Check [Analog Gyro].
5. Roll the wheel to set gyrocompass reading.
6. Click the [OK] button on the display to close the menu.
4.2

Junction Box

If the length of the antenna cable is more than 100 m, the optional junction boxes are
required. These boxes should be mounted at the location protected because its wa-
terproofing is IPX3.
Transceiver unit
RW-9600
(Max 15 m)
Junction box
RJB-001
DPYCY-6 (2 or 3 pcs.)
TTYCY-4 (1 pc.)
RG-12/UY (1 pc.) (Max 270 m)
Shipyard supply
4. INSTALLING OPTIONAL EQUIPMENT
Processor unit
RW-9600
(Max 15 m)
Junction box
RJB-001
4-9