Service - Clearaudio concept User Manual

Again, Clearaudio assumes no liability for incorrect handling or any damages, if
non-qualified persons attempt the above adjustments.
IMPORTANT:
For any transportation of the
the upper surface facing downwards into the packaging. Please ensure that you fully retract
the turntable feet.

Pic. 10: Packing of the platter
Further transportation advice:
For any transportation of the
(see above) and fix the tape holding the sub-platter as well as the tonearm and the cartridge
stylus protection. Otherwise serious damage can occur.
Clearaudio assumes no liability for damages that may occur due to wrong
packing!
Attention:
If the turntable is not in use, disconnect the unit completely from the power
supply by removing the main plug from the socket.

5. Service

If any servicing or repair on a Clearaudio product is necessary, please contact your dealer /
distributor or contact Clearaudio directly. We can advise you of your nearest service
location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if your turntable needs to
be transported and/or shipped. Any further questions you may have about this turntable
should be directed to your dealer / distributor or directly to Clearaudio at:
Page/ Seite 7
concept
turntable, please ensure that the platter is packed with
concept
turntable, please always remove the turntable platter
clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Germany
Tel/Phone: +49 9131 40300100
Fax: +49 9131 40300119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Concept
User manual / Bedienungsanleitung
 clearaudio electronic GmbH 2015