Service - Clearaudio CONCEPT User Manual

User manual / Bedienungsanleitung
4.4 Fine speed adjustment
As the motor adjustment is already pre-set at the factory, there is no need to check the speed
before using the turntable for the first time.
To adjust the speed as perfectly and precisely as possible, we recommend the Clearaudio
Stroboscope Testrecord (Art. No. AC038) and the Clearaudio "Speed Light"
(Art. No. AC039, both available at www.analogshop.de).
On the rear side of your turntable (close to the power supply input) there are three speed setting
controls:
- Left control = setting 78 rpm
- Middle control = setting 45 rpm
- Right control = setting 33 1/3 rpm
(near power supply jack)

5. Service

If any servicing or repair on a Clearaudio product is necessary, please contact your dealer /
distributor or contact Clearaudio directly. We can advise you of your nearest service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if your turntable needs to be
transported and/or shipped. Any further questions you may have about this turntable should be
directed to your dealer / distributor or directly to Clearaudio at:
Clearaudio electronic GmbH
Spardorfer Straße 150
91054 Erlangen
Germany
Phone: +49 9131 40300 100
8
Pic. 11: Speed setting controls on the rear
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Fax: +49 9131 40300 119
© clearaudio electronic GmbH, 2018/08