Important Notes - Clearaudio concept User Manual

4. Important notes

Adjustment of the tracking force
Never check or adjust the tracking force when there is a record on the platter. Always
remove the record first. The pre-adjusted and recommended tracking for the Clearaudio
concept
MM cartridge is 2.4 grams (+/- 0.2 grams) and for the Clearaudio
cartridge 2.2 grams (+/- 0.2 grams).
Adjustment of the tonearm height
As everything on the turntable is pre-assembled and tested, including tonearm and
cartridge, there is usually no need to change any parameters on the
If you want to change the height of your tonearm please refer to your nearest qualified
dealer or service personnel.
Your dealer can make the height adjustment by loosening the locking screw on the side of
the tonearm base of your turntable (see pic. 8).
Pic. 8: Adjustment of the tonearm height
Clearaudio assumes no liability for wrong handling or any damages, if non
qualified persons take any action on adjustments.
Adjustment of the Anti-skating force
Again, as everything on the turntable is pre-assembled and tested, including tonearm and
cartridge, there is usually no need to change any of the
want to change your cartridge and to adjust the Anti-skating force please refer to your
nearest qualified dealer or service personnel. Your dealer will find the Anti-skating adjuster
on the underside of the turntable.
Your dealer will find the Anti-skating – bolt on the underside of the turntable (see pic. 9).
Pic. 9: Adjustment of the Anti-skating
Page/ Seite 6
Concept
User manual / Bedienungsanleitung
concept
concept
turntable.
concept
turntable parameters. If you
 clearaudio electronic GmbH 2015
MC