Service - Clearaudio concept active User Manual

User manual / Bedienungsanleitung

6. Service

If any servicing or repair on a Clearaudio product is necessary, please contact your dealer /
distributor or contact Clearaudio directly. We can advise you of your nearest service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if your turntable needs to be transported
and/or shipped. Any further questions you may have about this turntable should be directed to your
dealer / distributor or directly to Clearaudio at:
Clearaudio electronic GmbH
Spardorfer Straße 150
91054 Erlangen
Germany
Phone: +49 9131 40300 100
IMPORTANT NOTES:
For any transportation of the
the upper surface facing downwards into the packaging (see Pic. 13).
Pic. 13: Correct packaging of the platter
Further transportation advice:
For packaging, proceed in the reverse direction as per assembly and set-up (see point 3).
For any transportation of the
and replace the tape securing the sub-platter as well as the tonearm and the cartridge stylus
protection. Otherwise serious damage can occur.
Please also ensure that you fully retract the turntable feet.
Clearaudio assumes no liability for any damage that may occur due to incorrect packing.
Made in Germany
concept active
turntable, please ensure that the platter is packed with

concept active
turntable, please always remove the turntable platter
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Fax: +49 9131 40300 119
11