Thermo Scientific Micro-Tech 9101 Reference Manual page 226

No. Parameter
4 Word length port
#1
5 Protocol port #1
5A Clear to send #1
6 Address port #1
7 Acces prot port #1
8 Baud Rate port #2
9 Set parity port #2
10 Stop bits port #2
11 Word length port
#2
12 Protocol port #2
12A Clear to send #2
13 Address port #2
14 Acces prot port #2
15 Half duplex delay
B-54 Micro-Tech 9101/9201 Reference Manual, Rev J
Selection
8, 7
Modbus*, Siemens 3964R*, Allen
Bradley DF1*, Printer
Disabled, enabled
1 (1 - 255)
None, limited, protected
9600, 19200, 110, 150, 300, 600,
1200, 2400, 4800
No Parity, even parity, odd parity
1, 2
8, 7
Printer, Modbus*, Siemens*, A/B
DF1*
Disabled, Enabled
1 (1 - 255)
none, limited, protected
0 msec (0 - 50 msec)
Description
*These options are only available when
Printer is selected from Protocol port
#2.
Note: This scroll is not available when
Printer is selected for Protocol port #1.
Note: This scroll is not available when
Printer is selected for Protocol port #1.
Note: This scroll is not available when
Printer is selected for Protocol port #1.
Note: Only available when COMM
board is installed.
Note: Only available when COMM
board is installed.
Note: Only available when COMM
board is installed.
Note: Only available when COMM
board is installed.
Note: This scroll is only available when
COMM board is installed.
*These options are only available when
Printer is selected from Protocol port
#1
Note: This scroll is not available when
Printer is selected for Protocol port #2.
Note: This scroll is not available when
Printer is selected for Protocol port #2.
Note: This scroll is not available when
Printer is selected for Protocol port #2.
Note: This scroll is only available when
a protocol other than Printer is selected
for either Protocol port #1 or Protocol
port #2.
Thermo Fisher Scientific