Section 3 Installation; Basic Installation Overview - Hach AMTAX sc User Manual

Ammonium analyzers
Hide thumbs Also See for AMTAX sc:
Table of Contents

Advertisement

Section 3

3.1 Basic installation overview

Installation
DANGER
Only qualified personnel should conduct the tasks described
in this section of the manual.
CAUTION
The enclosure may tip forwards if it has not been fixed in
place. Only open the enclosure if the enclosure is properly
mounted.
DANGER
Potential danger in the event of contact with
chemical/biological materials. Handling chemical samples,
standards and reagents can be dangerous. Familiarize
yourself with the necessary safety procedures and the correct
handling of the chemicals before the work and read and follow
all relevant safety data sheets.
Normal operation of this instrument may involve the use of
hazardous chemicals or biologically harmful samples.
1. Unpack the instrument
2. Mount the instrument
3. Remove any transport locks
4. Install the collecting tray and the humidity sensor
5. Determine the appropriate installation option
6. Mount the Filter Probe sc or Filtrax, if necessary. Refer to the
7. Connect the Filter Probe sc or Filtrax to the AMTAX sc, if
8. Connect the Drain Heating Connection, if necessary.
9. Make all plumbing connections
10. Install the reagents and prepare the Electrode and Electrolyte
11. Connect the AMTAX sc to the sc1000 controller to supply
12. Connect the data network
Observe all cautionary information printed on the original
solution containers and safety data sheet prior to their
use.
Dispose of all consumed solutions in accordance with
national regulations and laws.
Select the type of protective equipment suitable to the
concentration and quantity of the dangerous material at
the respective work place.
(section
(section 3.3, page
page 21
and
section 3.4.4, page
page
23).
appropriate manual for more information.
necessary. Refer to
section 3.5.3, page 26
sc. Refer to the Filtrax manual for more information.
Connection Options, page
(section 3.6, page 29
and
power to the system
(section 3.8, page
3.2).
14).
(section 3.4.2, page
19).
(section 3.4.3,
22).
(section 3.4.5,
for the Filter Probe
(Appendix A Plumbing and
77).
section 3.7.1, page
31).
33).
(section 3.9, page
34).
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents